The Goal

The Goal

Monday, 13 April 2015

Training vs. Practice

For much of my 25 shooting career I was pretty mediocre, managing the occasional possible or bar in the meeting; however I just knew that if I could somehow master myself and my technique then I could do much better. It felt like there was a good shooter inside me fighting to get out. If this describes the frustration that you feel about your shooting, then you should probably read on. I can't promise "one weird trick" to make you effortlessly qualify for the next Commonwealth Games or gain your first shooting place on the Palma Team, but I can give you some pointers. The good news is that achieving such goals is within your grasp; I absolutely believe that pretty much anyone can do it. The bad news is that unless you're very naturally talented, it's going to take quite a lot of hard work.

Looking back, there seem to be two key points in time where I've made major leaps in performance, each of which correlates with some lesson that I've learned. These haven't been about the specifics of technique; although both of them resulted in changes in technique which later improved my results. Nor have these been about increasing the volume of livefire practice that I've completed, and although the amount of shooting I have done has increased, that has been a consequence of improved performance and the increased number of invitations to tour or shoot in matches that I have received as a result.

Rather, these lessons have been much more general in nature. Think of them as philosophies that have informed my approach to my shooting.

Lesson 1 - Work out what you're doing wrong. Stop doing it wrong. Start doing it right.
Believe it or not, it took me about a decade in shooting to work this one out. It sounds very simple, trivially obvious even, yet when people have asked me for a critique of their position or some other aspect of their technique, and I have made comment about one flaw or another I have often received the answer, "But I've always done that. I don't think it's a problem."

It's incredible that such self-deception is possible but I believe that it is relatively common. I was certainly guilty of it for quite a while (see my post One Weird Trick for details.) Note that the person in question knows of the problem, very often they know that it's contrary to the principles of marksmanship, but still they do not perceive that it's a probable cause of poor performance despite the evidence to the contrary. The real issue very often lies not knowing that there is a problem, but in acknowledging it and acting upon that knowledge.

Lesson 2 - Stop practising. Start training.
The 2007 Palma Team tour was a critical turning point for me, not because I shot brilliantly as an individual and then earned my first Palma Match cap as a shooter. Actually, I shot mediocre groups in the DCRA meeting and the Individual WLRC. As a result, the Captain made the entirely correct decision  that I was to be reserve for the Palma Match and plotted both days. While I was delighted that I could still contribute to the team's success, I was gutted that it wasn't as a shooter. In my post-season analysis, I realised that I wasn't learning very effectively, spending most of my time banging rounds down Century and Stickledown ranges. I needed to focus less on practising, and more on training.

As a result of this lesson, I began to do a lot more dry firing, SCATT and visualisation. During my practice sessions, I spent more time on creative exercises. One particular favourite is to mix a few dummy rounds in with lives in a cloth bag and not look when loading, which gives immediate feedback on flinch and follow-through. Speed shooting is also a useful exercise, and a real area for improvement for me as anyone who has coached me can probably tell you. I also spent less time on the range in the following year, but my results improved. Since that time, I've expanded the range of activities that I do to train effectively to include cardio, stretching and other physical activities. I'll talk about some of these in future posts.

Conclusions
In the 2011 GB Palma Team Brochure I defined practise as "...the constant repetition of existing technique, often flawed..." and training as "...a schedule of highly varied exercises designed to identify and address flaws in technique planned around achieving a defined goal." My guess is that many, if not most fullbore shooters, do not train effectively and certainly do not have a defined plan to improve and yet they expect somehow to get better. How is this reasonable?

Take the time to make an honest appraisal of your shooting, and use the lessons you learn to build yourself a new plan to train, rather than merely to practise.

Tuesday, 7 April 2015

This One Weird Trick Can Eliminate Flinch

It is probably fair to say that my first tour with the Great Britain Palma Rifle Team to the World Long Range Championships at Connaught Ranges in 2007 was not a roaring success. While I came an acceptable 39th in the individual WLRC, my position in the DCRA Grand Aggregate was miserable, I didn't make the Governor General's Final and I was first reserve in. Every. Single. Goddamned. Team. Match.*

The long and the short of it was that my usual technique had degenerated from an extremely consistent and barely-controlled flinch into an inconsistent mess of a flinch. On my return from this tour, I decided that I should probably do something about this. I knew that good trigger control was critical to achieving consistent results and yet I managed to lie to myself about this, kidding myself that it really wasn't that big a deal and my technique was fine.

Normally, I'm a strong believer in the non-existence of silver bullets; however in this case I really believe that this one weird trick eliminated my flinch in the space of about 25 shots. There are a couple of different variations on the theme but it all really boils down to firing a few dozen shots not knowing whether there's a live in the chamber or a dummy/snapcap/empty.

I had tried having someone else load for me with a snapcap, but with the Swing Mk. III I was using at the time I could hear the difference between a live round and a snapcap being loaded. To get around this I made myself ten dummy rounds, each of which was identical to my normal handloads except for a) having an already fired primer, and b) the large red handwriting indicating that this was a dummy round. Otherwise they were completely indistinguishable from a live round, to the point of containing the same charge of the same powder.**

The next time I went to the range, I dumped the dummy rounds into a cloth bag with 20 live rounds and then shot a couple of 2+10s without looking at the rounds as I loaded the rifle. At the start my technique was close to what was normal for me at the time; however I got the fright of my life the first time I pulled the trigger on a dummy round: my position was beautiful, centred perfectly on the vee with only a tiny wobble, but all hell broke loose when the trigger broke! The rifle waved all over the bloody shop before coming to rest neatly back in the middle despite the complete lack of recoil.
This was something of an eye opener.

My composure eventually regained, I continued to shoot and seemed to take a lot more time over triggering, and the next time a dummy came up the rifle wavered only a little. The third time, the rifle didn't move when the firing pin went *ping*. It looked very much like I had cured myself of my flinch. Certainly, the last time I had a misfire (sometime in 2014) the rifle did not waver in the tiniest degree when the trigger broke.

It is worth emphasising at this point that in general my muscle memory felt like I was triggering correctly, just very quickly; however it was clear from the results that this was wrong. But when I consciously tried to squeeze the trigger more slowly, I simply could not do so no matter how hard I tried.

There. You know the secret of my success, or at least how I eliminated one bad habit. If you have a flinch or even a suspicion that your trigger discipline could be better, try this one weird trick and let me know how you get on.

* NB - I freely accept that the team hierarchy made exactly the right decision and that this was fundamentally my fault for not shooting well enough. Own your own performance biatches.

** If you are going to do this, please, please, please ensure that they are stored separately from real ammunition (but still under lock and key, as they may technically consistute a live round under UK law) and are clearly labelled as dummy rounds which contain real powder. Alternatively, use the same mass of an inert filler such as semolina.

Wednesday, 1 April 2015

Creedmoor Hardback Jacket Review

Creedmoor shooting jackets have been gaining popularity over the past few years and were used to great effect by a number of Commonwealth Games medallists in the fullbore event at Glasgow 2014. They work out slightly cheaper than the competition (particularly if you're used to flying to Switzerland to have the jacket custom-tailored) and are clearly capable of producing the goods at the sharp end of fullbore. The bottom line is though, would a Creedmoor work for me?

After a slightly dodgy season in 2014 where I had real problems holding any kind of group consistently, I decided that it was time for a new jacket which would fit my rather slimmer frame. Training for and running two half marathons had melted away over a stone (6.5kg) and my old Truttmann jackets weren't cutting it any more, even after some radical alteration by a skilled tailor. After a bit of thought and conversations with a few top-flight shooters, it looked like a full leather Creedmoor Hardback Shooting Coat might be the way to go. After a bit of worry-warting, I bit the bullet and ordered one from their website on August 11th and after speaking to a few other folks, promptly amended my order to request a few alterations to the basic product a day later. Creedmoor's team were more than accommodating, and promised to make the desired alterations. Fast forward a couple of months and the jacket had arrived in New Zealand; however I had to wait until our big move to Auckland to give it a go, and it wouldn't be until January that I'd get a chance to bang some rounds down with it.

First Impressions
Having opened up the package and taken the jacket out, my initial impressions were favourable. The quality of the leather was pretty good, the finish of the stitching was neat, and the rubber on the elbow and shoulder pads felt grippy. I also checked that the modifications were in place that I had been advised to make by Tony Sultana (a Creedmoor import agent in Australia who I met during the 2011 WLRC) and all looked to have been made exactly as requested:

1) Reversed Buckles - For reasons unknown, the buckles on the Creedmoor jackets are set up on the lefthand side of the jacket (from the point of view of the wearer) which means that right-handers shooting in the modified Estonian position get them in the ribs. Ask for them to be swapped over.



My first impressions of the Creedmoor Hardback Shooting Coat were positive.
2) Long Sleeves - I'd been advised that the sleeves are quite short and to get sleeves 2 inches longer than standard.

3) Modified Compression Straps - The default straps on the right shoulder are a bit wimpy and need an upgrade. I asked that they use the same straps for the shoulder as for the sling hook.


Chunkier shoulder compression straps.


4) Adjusted Sling Hook - The strap for the sling is a bit far back on the shoulder by default, so I asked for it to be moved forwards slightly.


Sling hook on the front of the shoulder.

5) Positional Upgrades - These are zips in the sides of the jacket. They make getting it on and off a bit easier. No more "Truttmann Shuffle" on the back of the firing point.

6) Ventilation - Panels of loosely-woven nylon which make the jacket more breathable and less sweaty in hot weather. Important in the Southern Hemisphere.


Positional upgrade zips for standing and kneeling/sitting in highpower, or easier entry/exit in fullbore! Also, not the ventilation panels.
Probably the most significant worry I had was about the right shoulder. I'd seen lots of people shoot in Creedmoor jackets in Canada, the USA and the UK and they all looked to have a loose, baggy right shoulder with a lot of excess material. The cut of the jacket made this feel like it might be a problem for me also, but that would have to wait until I got a chance to do some SCATT and livefire with it.

Fitting and Dryfire
Not having all of our possessions from the UK in NZ (most of them were still drifting their way across the ocean) I picked out one of my tighter-fitting hoodies and used that in place of a more normal shooting jumper. Fortunately I did remember to air-freight over my glove, sling and hat.

Putting the jacket on properly for the first time with a view to doing some dryfire, I was interested to feel how stiff it actually felt, and the level of support that the quilted back would give. My key goal for the session was to work out how much tension I would need in the chest and shoulder straps to give a good level of support without interfering with my natural position or breathing. Even though I had gone for a 36 inch chest I still needed to tighten the chest straps to a surprising degree and, as I had worried, the shoulder felt quite loose when standing up, so I needed to put a high degree of compression into the shoulder straps also.

As is normal for such a session, there was quite a bit of to-ing and fro-ing from trying the jacket in the prone position to removing the jacket and adjusting the straps before getting back down into the aim. After about eight or ten iterations I felt that I had found a sustainable and natural-feeling position, and did a 20 shot dryfire session. I didn't have the SCATT available at the time, so wasn't able to make a quantitative comparison with my best form using either of my two Truttmann jackets (I'll probably do this for a future blog post) but it would have to be good enough, as the NZ Nationals down at Trentham were looming fast.

Livefire
While I had wanted my first time out with the jacket to be on the range with my new club at Clevedon, near Auckland; however it was straight up into the Masefield 300 yards shoot down at Trentham. The Masefield is roughly equivalent to the pre-Grand shoots in the UK, as they do not count for the NZ Championship, which is concurrent with the Ballinger Belt series. Very often when making a change to equipment, and particularly something so fundamental as a jacket, what feels good when dryfiring turns out to be less than ideal on the range, even wholly unworkable sometime. Fortunately, it seemed that the position I had worked out suited the range as well as my living room carpet and I squeezed in a solid 35.5 ex 35.7 with only a few minor niggles.

Probably the most significant of the niggles was the removable towelling collar, visible at the top of the photo below, which I could never seem to get right. Sometimes there are little sequences of actions that can deal effectively with these niggles, such as putting the jacket on in a certain way like left arm first and then the right, but in this case nothing seemed to work. No matter what I did, it always ended up tucked inside the collar of the jacket and not hanging out over it. In the end my perseverance came to its limit and I removed it. That said, I don't think it's a bad idea per se, it maybe just needs a little alteration. I'm going to try putting in some more Velcro on the outside of the jacket to hold it in position more firmly. I'll let you know how I get on.


The removable towelling collar proved troublesome and I discarded it at the Kiwi Nationals.
My big worry about the shoulder proved unfounded in either individual shooting, where I shot through without removing the rifle from the shoulder, or in the team matches, where some decidedly tricky conditions meant that I had to put the rifle down to rest during some of the more wayward patches of wind. The material seemed to deform consistently and form a 'pocket' in the right place in the shoulder, and I experienced no issues with variable NPA (natural point of aim) or fall of shot. My zeroes were very consistent throughout the ranges, and the vast majority of my sighters were converted.

Getting in and out of the jacket was initially almost as difficult as with my old Truttmann jackets, but I soon worked out a trick to this: undoing the positional upgrade zips made the jacket a bit more flexible and easier to get into. Doing them up just before getting down tightened everything back up nicely.


Shooting at Trentham. Image reproduced with the kind permission of Richard Rowlands.
I was very happy with the performance of the jacket overall and will continue to refine my position and technique with it. I ended up 3rd in the Ballinger Belt and 5th in the NZ Grand Aggregate a couple of points off the lead, despite firing a shot on the wrong target at 300x in the first day of the Ballinger series. All (of the very few) shots lost to elevation I can conclusively say that I knew where they had gone and why, and points lost to wind corresponded very well to the conditions.
Shooting in the Ballinger Belt Final at Trentham. Maybe I need to think about mat position more carefully! Image reproduced with the kind permission of Richard Rowlands.
Conclusions
Will a Creedmoor work for you? I can't say for sure, but given the solid built quality of the jacket and the recent pedigree of performance behind it, it's got to be a contender if you're in the market for a jacket. The mixed leather/Cordura and Cordura-only models will bring the price down further. They do have a couple of issues, but these are minor and can probably be rectified fairly easily. Keep an eye out for them on the ranges and go ask other shooters what they think.

Disclaimer - I have no commercial relationship with Creedmoor or any of their agents. All thoughts are my own.